Passenger & Light Truck Tire Debeader

Passenger & Light Truck Tire Debeader

Passenger & Light Truck Tire Debeader  Passenger & Light Truck Tire Debeader Passenger & Light Truck Tire Debeader  Passenger & Light Truck Tire DebeaderPassenger & Light Truck Tire Debeader  Passenger & Light Truck Tire Debeader Passenger & Light Truck Tire Debeader  Passenger & Light Truck Tire DebeaderPassenger & Light Truck Tire Debeader  Passenger & Light Truck Tire Debeader Passenger & Light Truck Tire Debeader  Passenger & Light Truck Tire

Info

Load tires on the conveyor with the same people normally required to supply the shredder. The crew may place tires side by side or spaced out. The system adjusts for uneven or reduced tire flow. Different size auto and light truck tires (145R12 to 265/75R16 and most 17's) may be loaded interchangeably. The cyclic rate when full supplied is in excess of 500 tires per hour.

The units remove two beads simultaneously and pulls them through hardened steel die plates to strip most of the surronding rubber. The tire is counted as it is discharged on to the shredder feed conveyor. The bead wires drop on to a belt conveyor for removal from either side.

The entire unit is controlled by a PLC or programmable logic controller and powered by a electro-hydraulic motor-pump set. The electrical system is NEMA 4 rated and further protected for wash down or outside operation. Rain water in the tires is not a problem. Each unit is designed and built like a battleship to provide decades of dependable service. All wear parts are in stock and may be easily replaced on the machine.